Thursday, March 22, 2007

Xbox 360 Intercooler Mod

Been hearing a lot of negative stuff about the Nyko intercooler for the Xbox 360 and after doing some digging around i came to the conclusion that having a 3rd party hardware sucking up and disturbing the streamlined power being sent to the console using extremely powerful fans which might have variable power inputs depending on their quaity is good enough to ruin ones 360. But we still need the intercooler as Microsoft has pretty much abandoned us when it comes to cooling their monsters down.

Hence I modded my intercooler. Here are the steps I took :

First off i thought I would simply open the intercooler and disconnect its fans. With the help of an opening I brought the wires out and tried to feed them power via USB.



there was a black and brown wire that I cut and brought out through the opening. The connections inside looked solid ( for the remaining cables ) so i decided to leave everything intact. I closed the intercooler, powered up the USB and gave it a test.



It could have been a disaster, the USB was maxed out at 5V while the fans needed 12 volts at .13 amps each ( power hungry monsters, another reason i dont want them sucking off my 360's power ) and the USB couldnt supply them with enough. The 360 actually became hotter than 2 hrs of Gears of War while it was simply idling !!

I had no choice, i needed a stronger power supply. The sollution : a cheap 350W computer power supply. I rigged the thing to turn on when connected and attached the fans to them and boy was there some cooling to be seen !! An hour of Ghost Recon AW and the 360 felt cooler than it does when its on the dashboard doing nothing !!



All was good but there was still a problem. The power input for the 360 was still comming through the intercooler and i wasnt too happy with this. Given that the cases where the intercooler fries the 360 its power plug leaves a burn mark on the 360 that voids the warranty I decided to get rid of it.

So with the aid of a saw from the dollar store i started off. I cut off the following portion...



.....and was left with....



this way the 360's power cable goes in directly and surprisingly the intercooler seems to be able to balance without its plug going into the 360.



Conclusion : the system is much cooler now and in multiplayer i have actually seen a performance difference ( Played Ghost Recon AW and some huge explosions caused everyones 360 to lag for a second, even the hosts but mine barely stuttered :) Also this allows me to run the fan for a few minutes after i turn off the 360 so that the heat does not stay inside when the internal fans turn off.

Let me know what you guys think.